Review: List

Find Us On Facebook!

Return to 380-100 RNFP
Quantity of 500
Diameter: 0.355

Sort By::

Page of 4

0 of 0 people found the following review helpful:

Nice Accurate Bullet	June 20, 2024
Reviewer: Walt B. from FL United States

I'm getting a 3 inch 10 Shot Group at 25 Yards with my Browning 380 Auto 1911 Black Label 4.25 in Barrel. (I was standing 2 handed shooting through a chrono. Accuracy would be better in a shooting rest) The Rounds are consistent using Lee Dies or Dillon Dies. Also these bullets like 2.9 to 3.1 grains of Titegroup. I'm still working a load up for Autocomp. Over all the cases are clean burning and there are no signs of over pressure but please work up your load as cases and runs of powder are different.
Here is my Load Data:
380 Auto Starline Brass (New Brass)
Winchester Small Pistol Primer
COL .960"
3.1 grains TiteGroup
Crimped to .373"

CE Prochrono Data Muzzle 6 ft Away
Number of Shots 10
Average FPS 1004
ES 11
SD 4
Temp 90 Degrees
Barometric Pressure 30in HG
Average Power Factor 100
High Power Factor 101
Low Power Factor 99
Avg Energy 224.08 Ft/ LBS

Was this review helpful to you?

0 of 0 people found the following review helpful:

Runs good!	June 18, 2024
Reviewer: William Pendleton from Evansville , IN United States

I’ve shot around 3,000 of these now through my Glock 42 and Sig P365-380. I run them on top of 4 grains of CFEpistol and they flow like water. Both of these guns prefer a stiffer load to run right. I like them so much, I’m ordering another 1,000 when I get done here. Best 380 bullet I’ve found and at a good price.

Was this review helpful to you?

1 of 1 people found the following review helpful:

Great .380 bullets	January 1, 2024
Reviewer: Anonymous Person from ASHBURN, VA United States

These are great bullets. I tried at least 5 other brands and my Hornady LNL simply refused to make good ammo. I finally realized my problem was the bullets, so I went looking for better bullets. I have zero problems with these bullets. Size is perfect and they make great ammunition.

Was this review helpful to you?

4 of 4 people found the following review helpful:

Work great in my Glock 42	July 5, 2022
Reviewer: cary lang from charlottesville, VA United States

I used load data for 100 gr FMJ bullets with the exception of the OAL due to this bullet being a flat point. I loaded this bullet over 3.0 grains of Titegroup with an AOL of .965. They cycle flawlessly in my Glock 42 which can be ammo finicky. I am awaiting another 1000 on order now.

Was this review helpful to you?

5 of 23 people found the following review helpful:

No load data	January 25, 2021
Reviewer: Glenn Bacala from Titusville , FL United States

There isn't any published info concerning COL. I called and emailed customer support. Both replies were the same. " It will take 48 hours for someone to get back to you". Buyer beware.

Was this review helpful to you?

5 of 12 people found the following review helpful:

Wish they made a 100gr 9mm profile..	September 10, 2020
Reviewer: OE from Taylorsville, UT United States

But these will suffice for 1300fps PCC rounds. Loading with 4.2gr Sport Pistol @ 1.06x-1.07xâ€.

Also wish they were not RNFP But just RN, oh well they work.

Was this review helpful to you?

11 of 12 people found the following review helpful:

My go to	October 6, 2019
Reviewer: Nico from Rexburg, ID United States

I just finished ordering another batch, my wife and I cycled them through our 380 loaded with 3.5 grains of Hodgdon CFE and they shot beautifully. My 380 go to bullet.

Was this review helpful to you?

5 of 5 people found the following review helpful:

They work in 9mm pcc	July 4, 2019
Reviewer: Anonymous Person from Huntsville, AL United States

I load these as 9mm for steel challenge. Very soft shooting out of my PCC. Quick follow up shots.

Was this review helpful to you?

9 of 9 people found the following review helpful:

Great practice bullet!	December 9, 2018
Reviewer: Dan from Novato, CA United States

I requested a sampling of this .380/ 100 grain bullet for a Bersa Fire Storm I purchased recently. Since I load for about all my firearms I had to load for this one too. The pistol is not a tack driver but for its intended purpose a target and practice load that was close to as accurate as factory ammo was the goal. Using W-231 and Red Dot for the powders proved good in both loads with this inexpensive well designed bullet. Groups were the SAME size as the factory! I had no FTEs or FTFs. The pistol ran with no problems!
I will buy this again!

Was this review helpful to you?

3 of 4 people found the following review helpful:

Hole lot a ruckus!	November 25, 2018
Reviewer: Pie Eater from Galt, CA United States

Let's face it, the 380 is pretty much a gut gun which makes it fun to try and drive tacks with it. The beauty of reloading is that you can make any caliber any way you want to within reason. These little slugs perform very well in many different combinations of powders and primers. The challenging part is getting them to cycle in a progressive with a bullet feeder. It took some adjusting but we got it to work with little to no mis-feeds. Overall, they feed well, they load well and most certainly shoot well. We load and shoot a couple thousand rounds + a month and only use X-treme products for target and plinking rounds, we highly recommend them.

Was this review helpful to you?