Add Your Email to Receive Special Offers!

  Home > Copper Plated Bullets >

9mm-124 FP
  Quantity of 500
  Diameter: 0.355

  UPC: 819304313101

9mm- 124 FP
9mm- 124 FP
Quantity of 500
Diameter: 0.355

UPC: 819304313101


Product Code: XC9MM-124FP-B0500

X-Treme Bullets are proudly made out of the finest materials available in the United States in order to ensure performance delivered down range with each and every shot.  Our process starts with a lead billet that is extruded into wire. The lead wire is then swaged into a core. The cores are copper plated, then restruck once more. Though not common in the industry, this restrike process produces a bullet that is more uniform, with a more precise diameter and a smoother finish for a better shooting and better looking bullet.

Average Rating: 4.5 of 5 Total Reviews: 22 Write a review »

  1 of 1 people found the following review helpful:
Punches a Nice Clean Hole December 30, 2017
Reviewer: Weekendshooter from Altoona, PA United States  
I shoot about 6,000 of these a year in IDPA matches.  They work well in all of my pistols. My load is 5.8 gr. of AA #5 with an OAL of 1.070".  Please consider offering these in bulk quantities.

Was this review helpful to you?

  4 of 4 people found the following review helpful:
Good choice December 11, 2017
Reviewer: jsl55 from CA United States  
I'm very happy with these bullets. Here's my data using range brass: 4.0 grains of Titegroup, CCI 500, 1.095 OAL, Dillon 650.

Xtreme Plated 9mm
CCI 500 Primer
124 Grain
4.0 grains

G34 1084
Average 1091

PF 135

XD 5" 1054
Average 1072

PF 133

LC9 940
Average 944

PF 117

Was this review helpful to you?

  0 of 1 people found the following review helpful:
Watch Leade Engagement September 8, 2017
Reviewer: AZ Guthrie from Sierra Vista, AZ United States  
Matt in CP, Texas.  With these long-shanked bullets, you have to make sure the full-diameter portion of the bullet doesn't hit the leade of the rifling.  If you seat the bullet so it will fit freely in the barrel or in a cartridge gauge, you shouldn't have any problems.  Make sure you reduce powder charge to accommodate reduced case capacity.

Was this review helpful to you?

  0 of 3 people found the following review helpful:
Really Dissapointed so far August 11, 2017
Reviewer: Matt in CP from Texas  
I bought these from a reseller and can't seem to get them to feed properly in my Glock.  I am trying to diagnos the problem but I can't find any data on the website for OAL.  Seems like basic info that should be available.  I really want these to be a good option

Was this review helpful to you?

  25 of 25 people found the following review helpful:
My bullet of choice June 7, 2016
Reviewer: CB from Wooster, OH United States  
2016/06/07 (added chronograph data)
9mm Luger mixed cases, this 124 grain plated flat point, 1.100 inch OAL, light taper crimp (just to remove case flare), S&B small pistol primers, and ONE of the following (I weigh rather than dip) powder charges:
Alliant Unique 5.5 gr,   1239 fps,   423 ft lb
Alliant BE-86 5.5 gr,   1195 fps,   393 ft lb
Alliant Blue Dot 7.7 gr,   1154 fps,   367 ft lb
Hodgdon TiteGroup 4.2 gr,   1123 fps,   347 ft lb
Hodgdon LongShot 5.5 gr,   1111 fps,   340 ft lb

These function well in any pistol I've been able to try them in, including:
Sig P226 (used this pistol for chronograph data)
Sig P239
Sig M11-A1
Springfield XDM9 full size

Not wimpy loads, but shoot nice clean holes tighter than my aging hands can hold.

What more could I ask?

Was this review helpful to you?

View All Customer Reviews

Copyright ©  X-Treme Bullets LLC. All Rights Reserved. Built with Volusion

Website Designed by Visual Marketing