Add Your Email to Receive Special Offers!


  Home > Copper Plated Bullets >

30-30 150 FP
  Quantity of 500
  Diameter: 0.308

  UPC: 819304313446


308- 150 FP
 
308- 150 FP
Quantity of 500
Diameter: 0.308

UPC: 819304313446

Price:$57.50


Product Code: XC308-150FP-B0500
Qty:

Description
 
X-Treme Bullets are proudly made out of the finest materials available in the United States in order to ensure performance delivered down range with each and every shot.  Our process starts with a lead billet that is extruded into wire. The lead wire is then swaged into a core. The cores are copper plated, then restruck once more. Though not common in the industry, this restrike process produces a bullet that is more uniform, with a more precise diameter and a smoother finish for a better shooting and better looking bullet.

Average Rating: 4.5 of 5 Total Reviews: 36 Write a review »

  0 of 0 people found the following review helpful:
 
Mini 14 likes these December 11, 2017
Reviewer: Kurt Hepler from Hegins, PA United States  
These shoot fine in the Mini 14.
Groundhogs don't prefer them.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
300 AAC November 26, 2017
Reviewer: FTP from FORENCE, KY United States  
These are really good bullets. I weighed and measured them,  they were very consistent.

I made a bunch of 300 AAC test dummy bullets from 1.9" to 2.050" OAL. I could not get them to function consistently in my PSA rifle. I tried the Magpul M2 mags PSA metal mags, AR Stoner metal mags, Lancer AWM mag and lastly Magpul M3 300 AAC specific mag.

The bullet is so thick at the end, and has that flat nose that it tends to bounce off of the feed ramp and smash into the barrel inside the barrel extension. Even when a bullet chambers correctly, the end of it is deformed. I have not tried opening up the feed ramps with a Dremel tool yet because all of my other 300 bullets function well.   Other reviewers here have had success with them, but I have had not.

Bottom line...I don't recommend for 300 AAC.

Please Xtreme, make a 150gn 308 bullet with a profile similar to a Sierra Pro Hunter





Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Work great for Cowboy Rifle Metallic Silhouette May 18, 2017
Reviewer: Charles Strasser from Meridian, ID United States  
I have worked up a load to use in my metallic silhouette competition. First I am shooting these in a Marlin 336XLR with a 24in 6 grove barrel.  They shot all over the place.  I found a low pressure load and I know that they say don't crimp these too much but decided to really give them a heavy crimp with my Lee Factory Crimp Die.  This really closed the groups down shooting from a bench with a scope.  I load this bullet with 17.5gr Accurate 5744 for a velocity of 1650fps.  Since I shoot these for the chickens (50yd), Pigs (100yd), and turkeys (150yd) I sighted them in at the 200 yard ram line.  I can consistently get 2.12" groups with this load at 200 yards.  Of course in a silhouette match you are shooting standing off hand with metallic sights but the confidence from knowing how good the load is makes hitting targets very easy.  This load helped me earn a NRA Master rating in Cowboy Rifle Metallic Silhouette.

Was this review helpful to you?

  4 of 5 people found the following review helpful:
 
Too many flyers March 1, 2017
Reviewer: Richard from Sacramento, CA United States  
Using recommended reduced load H4895 (18-21g)in single shot target 30-30 rolling block, produced app. 1 in 5 flyers regardless of load; so if target accuracy (even at 25 yrds)is your thing, these bullets just don't match-up to a jacketed 150g bullet like Hornady. Yep they're relatively inexpensive compared to jacketed bullets but it is annoying trying to shoot groups with so many flyers.  I think Xtreme pistol velocity bullets are fine up to 15 yrds but I can't be thrilled when velocities are up around close to the recommended sub-1500fps when shooting reduced rifle loads. OK for plinking but not general accurate target shooting (which is probably what most people would do with these bullets).  If you are happy with the general accuracy level of say a typical tapered Mini 14, then you would be ok with these bullets.

Was this review helpful to you?

  2 of 4 people found the following review helpful:
 
150 g fp February 1, 2017
Reviewer: Benjamin Manier from Maybee, MI United States  
I bought a box of 500 for my 308 and my friends 300 blackout.  The bullet loads good in my ar10 but it's not accurate at all. The 300 blackout shoots them good but all kinds of loading problems. I will some day buy the dies to load for my 30-30 I hope my winchester 94 will shoot them. I would not buy or recommend this bullet.

Was this review helpful to you?

View All Customer Reviews

Copyright ©  X-Treme Bullets LLC. All Rights Reserved. Built with Volusion

Website Designed by Visual Marketing