357 Mag New Unprimed Brass

Find Us On Facebook!

Home > Brass > Pistol Brass >

357 Mag
Quantity of 500
New Unprimed Brass

357 Mag
Quantity of 500
New Unprimed Brass

Price:$157.50

UPC: 781100868850
Box Qty: 500

Quantity in Stock:14

Product Code: XB357MAGUPN-500

Qty:

Description

X-Treme Brass offers the reloader a wide variety of choices in high grade brass cases.

New brass cases are made in our Idaho facility to SAAMI specifications, and are available either unprimed or primed.

Remanufactured X-Treme Brass goes through several rigorous steps to ensure you are getting a quality component at a great price. The brass is full length sized back to factory new SAAMI specs, the primer pockets are reamed, then it is checked and washed using the latest technology available only to the X-Treme Brass and Freedom Munitions line of ammunition. This is premium ready to load brass which ensures reliable performance every time you pull the trigger.

Remanufactured brass is available in either unprimed or primed.

Average Rating: Average Rating: 3 of 5

3 of 5 Total Reviews: 3 Write a review »

0 of 0 people found the following review helpful:

Good value for the price	March 24, 2023
Reviewer: bigtimef150 from Adel, IA United States

This brass is very thick, as others have stated. I reloaded all 500 pieces I got on a Dillion 550c. I ran them through a RCBs carbide sizer, seated with a RCBS seater, and crimped with a Lee factory crimp die. The only issue I ran into was with the powder funnel on the 550. due to the cases being thicker the powder funnel required quite a bit of effort to pull it out of every case. It didn't harm the cases or damage the press. It was about the same force as needed to size a case, just on the up stroke which is awkward. I have fired these loads in 3 different revolvers and a Model X lever gun and had no issue. FYI most of this brass has a .0125 wall thickness as apposed to most of my other brass having a .0110-.0115 wall.

Was this review helpful to you?

0 of 0 people found the following review helpful:

New 357 xtream brass	March 5, 2023
Reviewer: Randy Smith from Rock Island, IL United States

I thought that I was losing my mind. I tried everything I could to make this brass work with my RCBS dies. I've reloaded thousands of rounds of 357 without problems. Finally, I read the previous review. It will not crimp and fit my case gauge! I did find a work around. hopefully it will help others?

Was this review helpful to you?

1 of 1 people found the following review helpful:

New .357 Mag Brass	January 27, 2023
Reviewer: David Anderson from Wynantskill, NY United States

I was happy to find this brass but IÃ¢â‚¬â„¢m extremely disappointed with it. First off it is not ready to load, be sure to resize first. Secondly, this brass is so thick it is almost to big to use. I canÃ¢â‚¬â„¢t believe what a horrible time I had using a lee factory crimp die. I tried the crimp on the bullet seating die and they wouldn’t even fit in my go/no go gauge.
I would have much rather spoke to someone in person about this but unfortunately I can’t find a contact number.
I have loaded thousands of pistol rounds in my years and never ran into this issue. I wont buy this brass again. Additionally, you can hardly read the weakly stamped head stamps.

Was this review helpful to you?