Sign Up for Special Offers & Our Monthly GIVE AWAY!

  Home > Copper Plated Bullets >

9mm-115 HP
  Quantity of 500
  Diameter: 0.355

  UPC: 819304313095

9mm- 115 HP
9mm- 115 HP
Quantity of 500
Diameter: 0.355

UPC: 819304313095


Product Code: XC9MM-115HP-B0500

X-Treme Bullets are proudly made out of the finest materials available in the United States in order to ensure performance delivered down range with each and every shot.  Our process starts with a lead billet that is extruded into wire. The lead wire is then swaged into a core. The cores are copper plated, then restruck once more. Though not common in the industry, this restrike process produces a bullet that is more uniform, with a more precise diameter and a smoother finish for a better shooting and better looking bullet.

Average Rating: 3.5 of 5 Total Reviews: 15 Write a review »

  1 of 1 people found the following review helpful:
Awesome January 26, 2017
Reviewer: Cletus from Ohio  
Upon first receiving these I was taken back by how nice they looked. Compared next to some 124gr FMJ Hornady's I had lying around, they were much more shiny (I know kind of a moot point, but I like shiny things). I then weighed out random bullets and out of 20 of them, they were all +/- .2gr. I consider this plenty acceptable, espically considering that with the hornady's I had to start 5 different weight catagories preforming the same random test. Yes, that's 5 different groups within 20 bullets but I digress.
So I moved on to loading, and they shot fantastic out of both my Glock 19 and S&W shield. I don't think I'll go back to using other bullets. Tight groups as well as I can shoot, could probably be much better from a competition shooter but I'm more than pleased with the results. Will be buying more.

Was this review helpful to you?

  17 of 22 people found the following review helpful:
115 hp Love them December 10, 2015
Reviewer: John from Kalamazoo, MI United States  
I like these very much.. I could not find any load info. I researched similar bullets  I came up with 1.075 oal and I'm using 4.2gn titegroup,4.5gn w231 or 5.8gn power pistol in my XD9 these are middle of the road.. I tried 3.9 and 4.0 in the tg and some stove piped and didn't lock chamber back on last round..Looked real sooty.. I have loaded close to 2000 so far and have another 1500 projectiles on hand. I am NOT suggesting use of any of my recipes  USE AT YOUR OWN RISK DO YOU OWN RESEARCH ALWAYS
Well I'm back again 12/9/15
I just tried some at 1.085 oal and they wouldn't chamber in my shield 9  so i tried the 1.080 and they would chamber fine but was all over the plate so i went back to my old recipe and the 1.075 worked good tighter pattern. I had the xd9 with me and they would except the 1.085 or 1.080 but the 1.075 worked best in both guns. still using the 4.5gn w231.
Im going to order a box of these from Freedom Munitions and check their oal.

Was this review helpful to you?

  2 of 5 people found the following review helpful:
10% flyers April 7, 2015
Reviewer: Moon Jeong from Roswell, GA United States  
I have tried loading into the lands all the way to a large jump into the lands. multiple powders. tried with fed, Winchester, CcI primers. Once shot + brand new brass. Crimp .381 down to .375. In a cz, glock, custom sti. Have even returned a large batch because I was getting crazy groups. So finally got the 124 Hp to group in less than 1 inch. The problem is that I have one flyer every ten shots that opens the group to 10"! So you can't really use these for competition because you can't be confident you'll hit a target out to 25 yards. I have spent countless hours, primers, and powder to find this out. The worse part is that when you buy in quantities of more than 2k, precision delta are slightly cheaper - and those are jacketed bullets! And they don't have flyers. I have pictures on my Facebook pge where I put 1 big stick at a time (29 rounds) into about 1.5 inches. Don't waste your time on these, unless you can get them at significant discount, which would be ok for practice ammo.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
9MM plated bullets October 28, 2014
Reviewer: Pat Nemes from Auburn Hills, MI United States  
I have used these now for 3 months and have seen a noticeable tightening of my groups at the 50 yard line. I had 6-7 inch groups at 50 yards with plain cast bullets and now I am getting 3-4 inch groups with these 115 gr plated bullets. I would recommend these to any shooter for use in bullseye or combat type competition

Was this review helpful to you?

  4 of 8 people found the following review helpful:
Not a happy camper August 15, 2014
Reviewer: Brad from United States  
Ordered 500 of these bullets because of the low price, but like the saying, you get what you pay for, so buyer beware. I've been handloading my own rounds for 20 years now, and as the previous commenter said, it's very important to take your time. But unfortunately you're just wasting time with these bullets. I initially decided not to buy any based off another reviewer's statement that the bullets tend to tumble, but thinking it was maybe a fluke I decided to go ahead. To my chagrin though, I experienced the exact same thing. I will not buy this product again, I require my bullets to be accurate, and I'll certainly pay a little more for quality rather than try to cut corners and save a few bucks with an inferior projectile.

Was this review helpful to you?

View All Customer Reviews

Copyright ©  X-Treme Bullets LLC. All Rights Reserved. Built with Volusion